Before you begin using your new Gigaset DECT system, we would like to provide you with a brief overview of the steps required for installation.

1. Add the DECT base station (N510 IP PRO) and DECT handsets (R650H, S650H, SL750H) to the administration portal. You can add up to 6 handsets.
2. Add an extension for the DECT handset on the centrexx administration portal and assign the respective handset (R650H, S650H, SL750H) zuweisen.
3. Register the handsets on the base station.

• Pick up the handset and dial the telephone number.

To correct a digit, press .

• Press  or .
• To end the call, press  or return the mobile handset to the charger.

• Dial the telephone number and press .
• To end the call, press .

Press on options and select then volume and save.

The redial list stores the last 10 numbers dialed (max. 32 digits each).

• Press .
• Select the desired telephone number.
• Dial the telephone number you need to reach.
• To cancel, press  .

• You can open the phonebook by pressing and holding the phonebook key (on the bottom of the menu key).
• Select Options on the display and refine your search.

When a call is coming in, the mobile handset’s ringer indicator flashes rapidly.

• Remove the mobile handset from the charger and press or  when the device is ringing.
• To end the call press .

When the mobile handset rings during an incoming call:

• Go into the menu and click on settings.
• Click on tones and signals and select then ringtones.
• Select the volume or melodies.

Missed calls are indicated on the mobile handset display (“Missed Calls”).

To access the missed calls list, press the softkey  .

You can then page through missed calls using button.

• During an external call press the display key .

The active call is now placed on “Hold”.

• To stop holding the call, select .

You are currently in a call. The call waiting tone indicates a second call is incoming. Simultaneously, a line icon flashes at the top of the display and the display also shows the telephone number or, for internal calls, the name of the extension.

• Press  to accept the waiting call.
• Using the  you can now switch between the two calls.
• To end a call, simply press  during the active call.

The other call is now on “Hold”.

• Press , to return to the call on hold.

Your mobile handset allows you to make a 3-way call.

• Call the 1st party.
• Press .
• Then call the 2nd party and wait until you have reached the 2nd party.
• Press .
• In order to end the conference, press   or .

• During an active call, press the display key .
• Now, dial the party to whom you would like to transfer the call.
• To do so, enter the party's telephone number and wait for the other party to answer, then announce the call. This step can also be omitted, if necessary.
• Press on Options and transfer the call.

During an active call, press the display key  .

• Now, dial the party to whom you would like to transfer the call.
• To do so, enter the party's telephone number and wait for the other party to answer, then announce the call. This step can also be omitted, if necessary.
• Press .

You will find the following options by clicking on the soft key menu:

In order to access the telephone menu, click on the following keys:

• Click in the middle of the control key.
• Open the info centre.
• Here, you will find user-defined information services.

Alternatively, you can add the menu to one of the two keys under the display.

• Click on one of the two keys and hold for 3 seconds. Select then info centre.