Gigaset N510 IP PRO DECT single cell manual

2. Used icons

The basic prerequisite for the use of the DECT solution with the telephone system (autoprovisioning) is an existing firmware version of at least 240. If you have a DECT base station with an older firmware, it would need to be updated manually. New devices purchased via NFON, are always equipped with the current firmware and do not have to be updated. You can check the current firmware version of your DECT base station by selecting "Basic settings" in the menu of the handset and then "Software version".
You can make 4 parallel calls per base station.
You can register up to 6 handsets (R650H, S650H, SL750H) on one base station.
The default language of the handsets is English. In order to change the language to German, follow the next steps. Click on menu > settings > language > Deutsch.

No content available.

Before you begin using your new Gigaset DECT system, we would like to provide you with a brief overview of the steps required for installation.

Add the DECT base station (N510 IP PRO) and DECT handsets (R650H, S650H, SL750H) to the administration portal. You can add up to 6 handsets.
Add an extension for the DECT handset on the centrexx administration portal and assign the respective handset (R650H, S650H, SL750H) zuweisen.
Register the handsets on the base station.

You need to register the handset on the base station. You can do this via the handset menu.

Press the key on the front side of the DECT base station for ca. 5 seconds.
Press the Register key on the handset. The handset now scans for the DECT base.
As the final step, please enter the required access code 0000.

Your DECT handset is now registered to the base station.

No content available.

Gigaset N510 IP PRO

Key	Key function
1	Registration / paging key

Action	Functions of the registration / paging key of the base station
Lights up	LAN connection active (phone is connected to router)
Flashes	Data transfer to LAN connection or base in registration mode
Press briefly	Launch paging (handset search), display IP address of the base on the handset Press and hold (ca. 5 seconds)Set base to registra
Press and hold (ca. 5 seconds)	Set base to registration mode. LED flashes at one-second intervals.

DECT handset Gigaset S650H

Key	Key function
1	Display
2	Status bar
3	Volume keys
4	Display keys
5	End call key, on / off key
6	Message key
7	Profile key
8	Hash key (keypad lock)
9	USB connection socket
10	Microphone
11	Star key
12	Headset connection
13	Key 1, can be assigned with the voicemail function
14	R-key (e.g. consultation and connect)
15	Talk key / handsfree key
16	Control key / menu key

Other handsets function similarly to the DECT handset Gigaset S650H.

For detailed information, please refer to the manufacturer's operating manual.

Placing calls with the mobile handset

Pick up the handset and dial the telephone number.

To correct a digit, press null .

Press or .
To end the call, press or return the mobile handset to the charger.

Using the hands-free feature

Dial the telephone number and press .
To end the call, press .

To return to using the receiver, press null .

Adjusting the receiver or speaking volume

Press on options and select then volume and save.

Placing a call using the redial list

The redial list stores the last 10 numbers dialed (max. 32 digits each).

Press .
Select the desired telephone number.
Dial the telephone number you need to reach.
To cancel, press .

Central phonebook

You can open the phonebook by pressing and holding the phonebook key (on the bottom of the menu key).
Select Options on the display and refine your search.

Answering calls with the mobile headset

When a call is coming in, the mobile handset’s ringer indicator flashes rapidly.

Remove the mobile handset from the charger and press or when the device is ringing.
To end the call press .

Adjusting the ringer volume on the mobile headset

When the mobile handset rings during an incoming call:

Go into the menu and click on settings.
Click on tones and signals and select then ringtones.
Select the volume or melodies.

Missed calls are indicated on the mobile handset display (“Missed Calls”).

To access the missed calls list, press the softkey .

You can then page through missed calls using null button.

During an external call press the display key .

The active call is now placed on “Hold”.

To stop holding the call, select .

You are currently in a call. The call waiting tone indicates a second call is incoming. Simultaneously, a line icon flashes at the top of the display and the display also shows the telephone number or, for internal calls, the name of the extension.

Press to accept the waiting call.
Using the you can now switch between the two calls.
To end a call, simply press during the active call.

The other call is now on “Hold”.

Press , to return to the call on hold.

Your mobile handset allows you to make a 3-way call.

Call the 1st party.
Press .
Then call the 2nd party and wait until you have reached the 2nd party.
Press .
In order to end the conference, press or .

A conference call with more than 3 parties can easily be set up on the administration portal: Please refer to the administration portal manual.

Attended call transfer

During an active call, press the display key .
Now, dial the party to whom you would like to transfer the call.
To do so, enter the party's telephone number and wait for the other party to answer, then announce the call. This step can also be omitted, if necessary.
Press on Options and transfer the call.

Unattended call transfer

During an active call, press the display key null .

Now, dial the party to whom you would like to transfer the call.
To do so, enter the party's telephone number and wait for the other party to answer, then announce the call. This step can also be omitted, if necessary.
Press .

You will find the following options by clicking on the soft key menu:

In order to access the telephone menu, click on the following keys:

Click in the middle of the control key.
Open the info centre.
Here, you will find user-defined information services.

Alternatively, you can add the menu to one of the two keys under the display.

Click on one of the two keys and hold for 3 seconds. Select then info centre.

Initial set-up

When accessing the voice menu of your voicemail system for the first time, you should also set up your personal answering system.

Press on the mobile handset to access the voice menu of the voicemail system.
Then select 0 Mailbox Options to set up your voice mailbox.
Now press 1 to record a message in the event you are unavailable.
Now record your message and press # to end the recording.
Press 1 to accept the recording, 2 to replay the recording, and 3 to rerecord.

Accessing voicemail

Dial *793 or press on your mobile handset.
Dial the direct dial/extension assigned on the administration portal for accessing the voicemail.

Where can you get help?

The information you found in the manual for this product does not answer your question?

We will be happy to help you. If you have technical problems, please open a ticket at service.deutsche-telefon.de - this is the quickest and most efficient way for us to help you.

If you need help immediately, please call us after creating the ticket and give us the ticket number. The technical service can be reached free of charge at the hotline number 0800 5802008.

If you have general questions about our products, e.g. about availability, test positions or similar, please use the contact options given at https://www.deutsche-telefon.de/kontakt.html.

1. Introduction B. Initial Operation