Before you begin using your new Panasonic DECT system, we would like to provide you with a brief overview of the steps required for installation.

1. Add DECT base (KX-TGP500) on the centrexx administration portal.
2. Add DECT mobile handsets (KX-TPA50) on the centrexx administration portal.
3. Add extension for DECT mobile handset on the centrexx administration portal and assign the respective mobile handset.
4. Register mobile handsets to base.
5. Done!

During the final step, you must register the mobile handset to the base. This is done using the menu of your Panasonic mobile handset.

1. To do so, open the main menu of your mobile handset.  (Joystick)
2. Then select menu item “Initial Settings”.
3. Next, select “Registration”.
4. Now select “Register mobile handset”.

5. On the DECT base press and hold  for approx. 4 seconds, then “OK” on the mobile handset.

The mobile handset now scans for the DECT base.

6. As the final step, you now need to enter the required access code. It is: “0000”.

Your Panasonic DECT mobile handset is now registered to the base.

A mobile handset  may delete its own registration stored in the base (or the registration for another mobile handset). This disconnects the mobile handset’s wireless connection to the system.

1. Press the menu key on your mobile handset  (Joystick) .

2. Enter the indicated code and OK to confirm.  

3. /  : Select the desired device and then confirm with OK.  

4. /  : Select “Yes” and confirm with OK.  

• When deleting a mobile handset other than the one you are using, press  to end. If you no longer wish to use the mobile handset, please remember to also remove it from the service site.

                                      

                       

• Pick up the handset and dial the telephone number.
• To correct a digit, press .
• Press  or .
• To end the call, press  or return the mobile handset to the charger.

• Dial the telephone number and press .
• To end the call, press .

Repeatedly press the joystick up or down during the call.

The redial list stores the last 10 numbers dialed (max. 32 digits each).

• Press .
• Select the desired telephone number.
•  /  When pressing  and the other party’s line is busy, the device automatically redials the number several times. While the mobile handset is waiting for redial, the ringer indicator flashes. To cancel, press .

When a call is coming in, the mobile handset’s ringer indicator flashes rapidly.

• Remove the mobile handset from the charger and press ,  or , when the device is ringing.
• To end the call press  or return the mobile handset to the charger.

• With the mobile handset ringing for an incoming call:
  • Repeatedly press the joystick up or down to select the desired volume.
• Programming the volume in advance:
  • (Joystick)
  • /  : Select the desired volume.
  • 

Missed calls are indicated on the mobile handset display (“Missed Calls”).

To access the missed calls list, press the softkey .

You can then page through missed calls using  / .

• Press  during an external call. The active call is now placed on “Hold”
• To cancel holding the call, press  or .

You are taking a call. The call waiting tone indicates a second call is incoming. Simultaneously, a line icon flashes at the top of the display and the display also shows the telephone number or, for internal calls, the name of the extension.

• Press  to accept the call waiting.
• Using the  you can now switch between the two calls.
• To end a call, simply press  during the active call.

The other call is now on “Hold”.

• Press , to return to the call on hold.

Your Panasonic mobile handset allows you to make a 3-way call.

1. Call the 1st party.
2. Once you have reached the 1st party, press the menu key  (Joystick), and select “4=Conference”. You can alternatively press the number “4” on your keypad. The active call is now placed on “hold”.
3. Then call the 2nd party and wait until you have reached the 2nd party.
4. Press the softkey  to activate the 3-way call. The display now indicates Conference.

During an active call, press the menu key.  (Joystick)

Now, select “2=Send”. You can alternatively press the number “2” on your keypad. The active call is now placed on “hold”.

Now, dial the party to whom you would like to transfer the call. To do so, enter the party’s telephone number and press .

Wait for the other party to answer, then announce the call. This step can also be omitted, if necessary.

Press the softkey .

During an active call, press the menu key.  (Joystick)

Now select “3=Send blind”. You can alternatively press the number “3” on your keypad. The active call is now placed on “hold”.

Now, dial the party to whom you would like to transfer the call without making an enquiry.

Press the softkey .

When accessing the voice menu of your voicemail system for the first time, you should also set up your personal answering system.

Please refer to the voicemail leaflet for detailed information.

1. Press *793 on the Panasonic mobile handset to access the voice menu of the voicemail system.
2. Then select “0 Mailbox Options” to set up your voice mailbox.
3. Now press “1” to record a message in the event you are unavailable.
4. Now record your message and press “#” to end the recording.
5. Press “1” to accept the recording, “2” to replay the recording, and “3” to rerecord.

1. Dial *793 from the Panasonic mobile handset.
2. Dial the direct dial/extension assigned on the service site for accessing voicemail.